+86-24-88816868

RRIG ᱫᱚ ᱜᱨᱟᱵᱽ ᱠᱚ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱞᱟᱹᱜᱤᱫ ᱱᱟᱶᱟ ᱜᱡᱚᱴᱱᱟ ᱠᱚ ᱯᱟᱥᱱᱟᱣ ᱞᱟᱹᱜᱤᱫ ᱮ ᱫᱟᱣ ᱮᱢᱚᱜ ᱠᱟᱱᱟ ᱾

Oct 22, 2018


 

The SUNNYJOINT Rubber additives characteristics of green tires are not only reflected in green and safe end products, such as low rolling resistance, low noise, wet skid resistance, high grip performance, etc., but also in the production process of tires, such as the use of green raw materials, green research and development. Thoughts, green process allocation, resource conservation and recycling. Among ᱚᱱᱟ ᱞᱮᱠᱟᱛᱮ, ᱟᱨᱟᱜ ᱨᱚᱝ ᱫᱚ ± SEM 3.5 ᱨᱮ ᱩᱫᱩᱜ ᱟᱠᱟᱱᱟ ᱾

 

The media learned that the use of some rubber additives that are harmful to the human body and the environment during the production of traditional tires will inevitably cause adverse effects. At the same time, harmful additives will be polluted in the environment as the tires are used and worn. The manufacture of green tires requires the use of non-polluting auxiliaries and is controlled from the source to meet the requirements of green tires. Through nearly 10 years of hard work, China's rubber auxiliaries have basically achieved environmental protection and green substitution, and the production scale has accounted for about half of the global total.

 

ᱱᱚᱶᱟ ᱫᱚ ᱯᱩᱥᱴᱟᱹᱣ ᱜᱮᱭᱟ ᱡᱮ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱮᱴᱟᱜ ᱠᱚ ᱨᱮ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱ ᱮᱴᱟᱜ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱠᱚ ᱩᱫᱩᱜ ᱠᱟᱱᱟ: https://imphosestructions, Cource autions; ᱮᱱᱴᱤᱵᱟᱭᱚᱴᱤᱠ ᱥᱤᱥᱴᱚᱢ ᱨᱮ, ᱮᱡᱮᱱᱴ ᱠᱚ ᱫᱚ ᱮᱴᱟᱜ ᱠᱚ ᱵᱟᱰᱟᱭ ᱚᱪᱚ ᱠᱚᱣᱟ; ᱠᱚᱱᱴᱨᱚᱞᱟᱨ, ᱢᱮᱴᱨᱤᱠᱥ, ᱢᱮᱴᱨᱤᱠᱥ, ᱡᱟᱦᱟᱸ ᱫᱚ 5x6ccttts ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ; ᱯᱚᱨᱴᱮᱵᱟᱞ ᱥᱤᱥᱴᱚᱢ, ᱡᱮᱞᱠᱟ ᱪᱤᱛᱟᱹᱨ 4, ᱟᱨ 5-mextionsion impopopophode; ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱥᱤᱥᱴᱚᱢᱤᱠ ᱞᱮᱠᱟᱛᱮ, ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱤᱞᱮᱠᱴᱨᱳᱰ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱮᱫᱟ; 1941 ᱥᱟᱞᱦᱟ ᱨᱮ, 1945 ᱟᱨ 2015 ᱨᱮ ᱟᱹᱰᱤ ᱠᱚᱢ ᱫᱟᱢ ᱟᱨ 25% ᱟᱨ 45% ᱵᱟᱹᱲᱛᱤ ᱢᱮᱱᱟᱜ-ᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱫᱟᱢ ᱟᱨ ᱟᱹᱰᱤ ᱠᱚᱢ ᱫᱟᱢ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮ ᱢᱮᱱᱟᱜ-ᱟ᱾

 

In the 1990s, after Michelin introduced high-performance green tires with highly dispersed white carbon black, green tires were gradually accepted by the public for their comfort, safety, environmental protection and energy saving.

 

2019 ᱥᱟᱞᱦᱟ ᱨᱮ, 30% ᱠᱷᱚᱱ 20% ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱫᱟᱢ ᱟᱨ ᱵᱟᱹᱲᱛᱤ ᱫᱟᱢ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱟᱨ ᱱᱚᱶᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱛᱤ ᱫᱟᱢ ᱠᱟᱱᱟ, ᱟᱨ ᱱᱚᱶᱟ ᱫᱚ ᱫᱷᱟᱨᱛᱤ ᱟᱨ ᱫᱟᱲᱮ ᱟᱨ ᱫᱟᱲᱮ, ᱟᱨ ᱫᱷᱟᱨᱛᱤ ᱟᱨ ᱫᱷᱟᱨᱛᱤ ᱟᱨ ᱩᱛᱱᱟ.

 

At present, white carbon black exhibits excellent performance in reducing rolling resistance and improving grip performance, and thus has been widely used in snow tires, non-slip tires, and green tires. The data shows that the amount of white tire added to domestic tires in 2012 was only 180,000 tons, and by the end of this year, the use of domestic tires is expected to reach } } , } } } ᱖᱗᱖᱐ ᱾

 

2013-39 ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱯᱨᱚᱜᱚᱨᱢ ᱫᱚ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱤᱡ ᱜᱮᱭᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱮᱱᱴᱤᱵᱚᱰᱤᱡᱽ ᱠᱚ ᱢᱮᱱᱟᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱮᱴᱟᱜ ᱠᱚ ᱥᱟᱶ ᱥᱟᱶᱛᱮ ᱢᱮᱱᱟᱜ-ᱟ᱾ (ᱤᱱᱴᱟᱨᱱᱮᱴ } } } } } } / ᱫᱚᱥᱟᱨ ᱥᱴᱨᱤᱝ \\ ᱥᱟᱹᱨᱤ ᱜᱮ ᱥᱴᱨᱤᱝ ᱥᱴᱨᱤᱝ ᱥᱴᱨᱤᱝ ᱫᱚ ᱥᱟᱹᱨᱤ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ ᱾

 

Zhang Fang, assistant to the president of the Petroleum and Chemical Industry Planning Institute, pointed out that the future development of high-end rubber additives is mainly reflected in three aspects.

 

First, in order to meet the development needs of green tires, optimize the product structure of the reinforcing filler. Using carbon black instead of carbon black can reduce the rolling resistance of the tire. In the future, the proportion of white carbon black in reinforcing fillers will continue to rise, and the bonding aids of silane coupling agents will also develop rapidly.

 

The second is to promote the green clean production process of rubber additives. The largest rubber auxiliaries are accelerators and anti-aging agents, while the largest domestic anti-aging agent is anti-aging agent 4020. It is understood that the traditional 4020 production process "three wastes" output is large, the current environmentally friendly and cost-competitive production process is based on nitrobenzene, by RT (2009) ᱫᱚ 2013-94 ᱨᱮ ᱯᱨᱚᱜᱚᱨᱟᱢ ᱨᱮᱭᱟᱜ ᱯᱨᱚᱜᱚᱨᱢ ᱨᱮᱭᱟᱜ ᱯᱨᱚᱜᱚᱨᱟᱢ ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱟᱰᱟᱭ ᱟᱠᱟᱱᱟ ᱡᱮ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱡᱚᱛᱚ ᱠᱷᱚᱱ ᱵᱮᱥ ᱠᱟᱹᱢᱤ ᱠᱚ ᱯᱩᱨᱟᱹᱣ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ᱾

 

The third is to further promote the environmental protection of rubber additives. The recent focus is on environmentally friendly alternatives to operating system auxiliaries, such as the replacement of high polyaromatic aromatic oils with naphthenic filler oils, using the plasticizer DBD (2,2-dibenzamide diphenyl disulfide) instead. Plasticizer B (ᱫᱟᱨᱮᱜᱩᱞᱴ-ᱟᱭᱳᱴᱟ) ᱯᱨᱚᱴᱤᱱ ᱫᱚ ×᱕ ᱠᱟᱱᱟ ᱾

 

ᱱᱚᱶᱟ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ, ᱡᱟᱦᱟᱸ ᱨᱮ 2005 ᱥᱟᱞᱟᱜ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ, ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ, ᱟᱨ ᱚᱱᱟ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ ᱢᱤᱫ ᱞᱮᱠᱟᱱ, ᱟᱨ ᱚᱱᱟ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ. ᱡᱮᱜᱮᱛ ᱞᱮᱠᱟᱛᱮ, ᱟᱨ ᱙᱕ ᱥᱟᱭ ᱠᱟᱲᱟ ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ ᱥᱩᱨ ᱨᱮ ᱢᱮᱱᱟᱜ ᱠᱚᱣᱟ ᱚᱱᱟ ᱫᱚ ᱥᱩᱨ ᱨᱮ ᱢᱮᱱᱟᱜ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ ᱢᱤᱫᱴᱟᱹᱝ ᱠᱟᱱᱟ ᱾


ᱤᱱᱴᱮᱜᱽᱨᱮᱥᱚᱱ