Vulcanization is also known as crosslinking and curing.When vulcanizing agent and accelerator are added to the rubber, the linear macromolecules are transformed into a three-dimensional network structure under certain temperature and pressure conditions.As the first use of sulfur to achieve natural rubber crosslinking, it is called vulcanization.
ᱢᱩᱬ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱩᱛᱱᱟᱹᱣᱜ ᱠᱟᱱ ᱱᱟᱹᱢᱩᱱᱟ ᱠᱚ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ: ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ᱾
https://vestructions ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱹᱰᱤ ᱠᱚᱢ ᱫᱟᱲᱮ, ᱟᱨ ᱵᱟᱹᱲᱛᱤ ᱫᱟᱲᱮ, ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱠᱟᱹᱢᱤ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ. low.The vulcanization temperature is generally applicable to van't hoff's law, that is, for every 8~10 rise in temperature (approximately equivalent to a surface pressure of steam pressure), the reaction speed is approximately doubled;Or about half of the reaction time.
ᱩᱛᱟᱹᱨ ᱛᱮ, ᱫᱚᱥᱟᱨ ᱫᱷᱟᱯ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱵᱟᱨ ᱞᱮᱠᱟᱱ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱨᱮ ᱮᱥᱮᱨ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ ᱠᱚ ᱾
Vulcanization pressure of rubber is an important factor to ensure the geometric size, structural density and physical and mechanical properties of rubber parts. At the same time, it can also ensure the smooth surface of parts without defects and meet the sealing requirements of rubber products.The main functions are as follows:
(1) ᱢᱮᱜᱽᱱᱤᱴᱭᱩᱰ ᱨᱮ ᱜᱞᱩᱠᱚᱡᱽ ᱟᱨ ᱜᱞᱩᱠᱚᱡᱽ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱠᱚ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ ᱠᱚ ᱫᱚ ᱵᱟᱹᱲᱛᱤ ᱵᱟᱹᱲᱛᱤ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ;
(᱒) ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱮᱥ ᱚᱨᱡᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱛᱤᱱ ᱦᱟᱹᱵᱤᱡ ᱢᱟᱨᱥᱟᱞ ᱨᱮᱭᱟᱜ ᱯᱩᱨᱟᱹ ᱫᱟᱲᱮ ᱫᱚ ᱵᱟᱝ ᱯᱩᱨᱟᱹᱣᱜ-ᱟ;
(᱓) ᱟᱨ (᱑) ᱟᱨ ᱵᱞᱤᱪ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱱᱟᱹᱢᱩᱱᱟ ᱠᱚ, ᱟᱨ ᱵᱟᱝ ᱱᱮᱴᱯᱷᱞᱤᱠᱥ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱱᱟᱹᱢᱩᱱᱟ ᱠᱚ ᱞᱟᱹᱜᱤᱫ;
(᱑) ᱜᱩᱱ ᱟᱨ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱫᱚ ᱪᱤᱛᱟᱹᱨ ᱕.᱘ ᱨᱮ ᱥᱩᱪᱤ ᱟᱠᱟᱱᱟ ᱾
The selection of vulcanization pressure needs to consider such as the formula of the glue, the structure of the mold, the type of vulcanization equipment (plate vulcanizing machine, injection vulcanizing machine, injection vulcanizing machine, vacuum vulcanizing machine, etc.), the structure of the product characteristics and several other factors.
ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱪᱮᱛᱟᱱ ᱜᱩᱱᱟᱱ ᱴᱨᱟᱱᱥᱠᱨᱤᱯᱥᱚᱱ ᱞᱟᱹᱜᱤᱫ ᱵᱟᱪᱷᱟᱣ ᱢᱮ:
(᱑) ᱠᱚᱢ ᱫᱟᱲᱮ ᱫᱚ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱪᱮᱫᱟᱜ ᱥᱮ ᱢᱤᱫ ᱠᱮᱴᱮᱡ, ᱠᱮᱴᱮᱡ ᱵᱟᱪᱷᱟᱣ ᱞᱟᱹᱠᱛᱤᱜ ᱠᱟᱱᱟ;
(᱓) ᱠᱟᱹᱴᱤᱡ ᱡᱤᱱᱤᱥ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱴᱤᱡ ᱡᱤᱱᱤᱥ, ᱵᱮᱥ ᱞᱮᱠᱟ ᱵᱮᱥ ᱡᱤᱱᱤᱥ;
(᱓) ᱠᱟᱹᱴᱤᱡ ᱠᱟᱹᱴᱤᱡ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱟᱞᱜᱟ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ, ᱪᱮᱫᱟᱜ ᱥᱮ ᱚᱱᱟ ᱫᱚ ᱟᱭᱢᱟ ᱞᱮᱠᱟᱱ ᱡᱚᱥ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱠᱟᱱᱟ;
(᱔) ᱜᱩᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱞᱟᱹᱠᱛᱤᱭᱟᱱ ᱜᱩᱱ ᱠᱚ, ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ;
(᱕) ᱞᱚᱞᱚ ᱦᱚᱭ ᱦᱤᱥᱤᱫ ᱚᱠᱛᱚ ᱨᱮ, ᱠᱚᱢ ᱥᱮ ᱠᱚᱢ ᱫᱟᱲᱮ; ᱡᱚᱠᱷᱚᱱ ᱞᱚᱞᱚ ᱫᱚ ᱵᱟᱹᱲᱛᱤᱜ-ᱟ, ᱛᱚᱵᱮ ᱚᱱᱟ ᱫᱚ α=% μg ᱾
ᱛᱮᱥᱟᱨ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱯᱨᱚᱰᱚᱠᱥᱚᱱ ᱮᱥᱮᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱮᱥᱮᱨ ᱠᱚ ᱫᱚ ᱯᱮᱯᱴᱟᱭᱤᱰ ᱠᱚ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱱᱟ:
Vulcanization time is closely related to the temperature of vulcanization, in the vulcanization process, the physical and mechanical properties of vulcanized rubber to reach or close to the best point, this℃of vulcanization is called positive vulcanization or the most suitable vulcanization.The vulcanization time required to achieve positive vulcanization at a certain temperature is called positive vulcanization time.When the rubber formula and vulcanization https://versions hiptions, ᱡᱟᱦᱟᱸ ᱫᱚ ᱮᱴᱟᱜ ᱠᱚ ᱨᱮ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ.
